Millfeeder BRAVO

indicated for (scrap type)
  • Bales
  • Light scrap
  • Collected scrap
  • E.L.V. scrap cars

BRAVO : advantages

  • Virtually eliminates explosion risks.
  • Reduces and optimizes the energy consumption during the shredding process.
  • Reduces vibrations and noise of the shredder.
  • Shredder output optimized.
  • Increases the wear life of internal shredder castings, such as hammers, grates and side-liners.

Allows smaller shredder plants to operate at higher production levels by pre-processing oversized or high density bales, scrap cars and other bulky scrap.

Description

The BRAVO, hydraulic twin shaft “millfeeder” is the perfect solution to create a more homogeneous mill feed for shredders. Explosion risks from LPG, CNG and car fuel tanks are virtually eliminated and the production rate of the shredder is significantly increased. Electrical power peaks are smoothed, wear and tear on the shredder reduced while the output is optimized.

Attributes
U/M
B12R
B14R
B16R
B16H
Maximum compression force
t
100
100
160
160
Feeding chamber dimensions (W x L)
mm
2000×2500
2000×2500
2500×3250
2500×3250
Counter-rotating shafts
n
2
2
2
2
Main Electric motors power
Kw
275
410
490
610
Low speed rotor:
_ Rotor speed
rpm
2
2
5
4
_ Teethed disks diameter
mm
1200
1400
1600
1600
_ Teeth on each disk
n
8
9
10
10
_ Hydraulic motor
Brand
Hagglunds
Hagglunds
Hagglunds
Hagglunds
High speed rotor:
_ Rotor speed
rpm
10
10
20
16
_ Teethed disks diameter
mm
1200
1400
1600
1600
_ Teeth on each disk
n
10
10
20
16
_ Hydraulic motor
Brand
Hagglunds
Hagglunds
Hagglunds
Hagglunds
Flap power system:
_ Flap compression force
t
100
100
160
160
_ Flap electric motor
Kw
55
55
90
90
Cooling fan motors
Kw
1×0,5
1×0,5
1×0,5
1×0,5
Output using mixed grade scrap (50% bales)
t/h
< = 40
< = 60
< = 80
< = 100
Maximum bale density
t/m3
1.2
1.2
1.4
1.4
Weight of the machine (Ext.)
t
60
90
120
125